“Refueling Your Vehicle”
Young drivers have seen gas being pumped into cars since their childhood, but many young drivers do not know how to pump fuel into their vehicles at a gas station. This blog will attempt to give young drivers the steps and procedures for refueling their vehicles.
Step 1: Notice you have low fuel. All vehicles come equipped with a fuel gauge indicating to the driver the current amount of fuel in the fuel tank. It is important to check this gauge often. It is recommended to refuel at about ¼ the fuel remaining on the gauge. In colder weather, it is smart to refuel more frequently to prevent being stranded in the cold.
Step 2: Locate a gas station. These can be found almost anywhere in the United States. You can use most mapping services to find the closest location. Once at the gas station, pull your vehicle up alongside the pump with your fuel door closest to the pump. Most vehicles have a little indicator in the gauge cluster to remind the drivers.
Step 3: Turn off the vehicle. Now, choose a suitable payment option before operating the pump. Most gas stations in the United States require payment or a form of payment before you are able to pump the fuel. If you are paying at the pump, insert or swipe your card and follow the instructions on the screen. To pay with cash, you will have to interact with the attendant for the amount of gas you will be filling using cash. You can also pay with a card with the attendant if you wish to do so. Remember to note what pump you are parked at to tell the attendant.
Step 4: Open the fuel door and cap. To open the fuel door, you may need to pull a lever in the driver's footwell or simply press on the outside of the door. To remove the cap rotate the cap in an anti-clockwise fashion until it is completely off.
Step 5: After payment, the pump will ask you to select a grade or type of fuel. It is important to know what type of fuel goes into your vehicle. This can be found in the owner's manual or on the gas cap. Do not mix up gasoline and diesel. Diesel is often indicated with a green handle, but this is not universal.
Step 6: Pump the fuel. Insert the nozzle into the gas tank and pull the trigger. Most pumps have self-stopping mechanisms, which means they can stop pumping fuel themselves when your tank is full or when the amount you prepaid for has been reached. It is important to keep watch to prevent gas spills.
Step 7: Once you have completed fueling, place the nozzle back, tighten your gas cap, close your fuel door, and reenter your vehicle. Start your car and check your fuel gauge. If all seems good, check your surroundings and continue with your day.
Knowing how to get gas is a vital skill all drivers should know. Refueling becomes easier once you have a bit of experience. It is a series of steps you will be doing throughout your driving lifetime unless we switch to electric vehicles. Once you have got the hang of it, it will end up as a simple and straightforward part of your day.
Commenter of the Month
Comment down below things you should never do around gas pumps.